e-Flow Battery V. 3.0 Li-Ion 14,4 V / 3,4 Ah / 49WH

Charging cradle for lithium-ion batteries for the e-breathe e-flow respiratory ventilator. The charging cradle charges the following batteries: -e-breathe e-Flow battery

e-breathe e-Flow Thanks to its innovative and modular design, this respiratory protection blower system is one of the latest generation. Blower / Technical details:• Lithium-ion battery: 14.4V / 3.4Ah • Replaceable battery • Battery life approx. 7 to 10 hours • Battery charging time 2.5 hours • Acoustic, visual and vibration alarm • Air flow rate 160 – 180 – 200 l/min • Adjustable volume flow on the device • DIN round thread hose connection • Colour display with all important information: real-time battery status, filter capacity, volume flow • Weight: approx. 1100 g • Approval: EN12941, EN12942, EN138 PM Laboratory Hood AV Limited-USE The PM Laboratory Hood AV offers every user high wearing comfort and effective protection. The complete hood is made of a  particle-tight, low-noise and lint-free material with integrated eye protection and shoulder cover. Together with a respiratory protection fan, a constant positive pressure is built up in the hood, allowing it to function independently without any headgear. In addition, the positive pressure built up in the hood achieves the highest protection class TH3 without the air flow blowing uncomfortably into the wearer's face. This is because the air flows inside the hood along the inside of the large PC visor. The head straps can be universally adjusted to fit any head, and the bib can be worn outside or inside a protective suit. Furthermore, there is no limit to the wearing time and no G26 preventive medical examination is necessary, as the hood does not cause any breathing resistance for the user. Product details: • Protection class TH3 • Version: Limited use • Colour: white • Extremely low weight • No G26 medical examination • No wearing time limit • Suitable for beard and glasses wearers Ready Pack consists of: Starter Pack e-breathe e-Flow PAD Box Hood system  (with battery, charging cradle, Comfort Belt Pro)  e-breathe e-Flow disposable device cover - PAD box (limited use) e-breathe ecoPAD P3 R/PSL (pack of 4/45) e-breathe cleaning/storage kit e-Flow PAD box (decontamination set) e-breathe filter cover PM laboratory hood AV 2.0 (Limited Use) Breathing air hose PM Klick flexible e-breathe protective cover for breathing air hose (Limited Use)  e-breathe pre-filter 100 mm (pack of 20)  &  e-breathe pre-filter  holder Storage - PM Service Box *M*

Thanks to its innovative and modular design, this belt-mounted respiratory protection fan system is one of the latest generation of respiratory protection fans. Its slim housing and ergonomic design make it easy to use even in confined spaces. The system consists of a base unit and various filter boxes that serve as filter holders. The modular design allows the device to be converted to suit specific requirements. • Automatic system test: The integrated software of the intelligent e-Flow performs an automatic system test every time it is switched on, thus checking the functionality of the device before each use. • Intelligent 2-stage warning system:The electronics continuously monitor all important components and warn the user if the minimum volume flow is not reached, if the filter is full or if the battery power is too low. -> Acoustic, optical and mechanical (vibration alarm) signal • Reliable power source: Replaceable and lightweight lithium-ion battery with fast charging function and a long service life. Thanks to communication between the system and the battery, the remaining battery life is always shown in real time on the display. Technical details: • Lithium-ion battery: 14.4 V / 3.4 Ah •  Battery life approx. 7 to 10 hours • Air  flow 160 – 180 – 200 l/min Set consists of: e-Flow  blower unit with PAD box, 2x e-breathe filter covers, e-Flow battery, charger and e-breathe comfort belt Standard is hood mode 160-180-200 l/min, can also be supplied as a variant for full masks and half masks with 120-140-160 l/min (calibrated).*The hose must be ordered separately to fit the headpiece and is not included in the scope of delivery! Note:  The filters are not included in the scope of delivery and must be ordered separately. Product images with filters are for illustration purposes only. Respiratory protection systems (consisting of an air source, a hose and a headpiece) must be serviced  regularly in accordance with DGUV 112-190 and manufacturer's specifications to ensure proper and safe functioning for users (see instructions for use). Please contact us if you have any questions; we are an authorised and certified service centre. 

e-breathe e-Flow Thanks to its innovative and modular design, this respiratory fan system is part of the latest generation. Fan / Technical details:• Lithium-ion battery: 14.4 V / 3.4 Ah• Replaceable battery• Battery life approx. 7 to 10 hours• Battery charging time 2.5 hours• Acoustic, visual and vibration alarm• Air flow rate 160 – 180 – 200 l/min• Adjustable volume flow on the device• DIN round thread hose connection• Colour display with all important information: battery status in real time, filter capacity, volume flow• Weight: approx. 1100 g• Approval: EN12941, EN12942, EN138 Optimally coordinated: individual – comfortable – safe The new and innovative concept of the Multi-Hood impresses with its versatility and maximum wearing comfort. The lightweight positive pressure hoods from e-breathe offer users the highest protection class and can be optimally adapted to any area of application and different requirements. Thanks to the unique and innovative concept of the Multi Hood, the protective equipment can be adapted to your requirements as desired and is available as both a dual-use and reusable hood. The hood is made of a low-noise, robust, crease- and lint-free material. The hood cover is available in different versions depending on the area of application and fits on different mounts. The individually selectable carrying systems allow the Multi Hood to be used with a head mount or helmet mount. Practical magnetic buttons allow the hood cover to be mounted on the respective mount in just a few simple steps. The helmet mount fits almost any standard industrial helmet. The Multi Hood sets new standards in terms of comfort:  the visor is ergonomically shaped and features an extra-large, distortion-free field of vision. A textile neck seal with elastic ensures that the Multi Hood fits perfectly around the neck. The shoulder cover can be worn inside or outside the protective suit. When worn inside, the suit is supplied with excess air. Product features: Certified respiratory protection according to EN 12941 Certified eye and face protection according to EN 166 F Head protection according to EN 397 Highest protection class TH3 Respiratory, head, face, neck and shoulder protection Suitable for beard and glasses wearers Distortion-free all-round vision Extremely low weight No G26 preventive medical check-up • No wearing time limit Helmet mount The innovative and lightweight helmet mount fits almost any standard industrial helmet and is quick and easy to install. Quick and secure attachment of the hood to the carrying frame with extra-strong industrial magnetic buttons Compatible with most standard safety helmets Intelligent and secure attachment of helmet and carrying frame Note: Product is delivered without helmet.  

Thanks to its innovative and modular design, this belt-mounted respiratory protection fan system is one of the latest generation of respiratory protection fans. Its slim housing and ergonomic design make it easy to use even in confined spaces. The system consists of a base unit and various filter boxes that serve as filter holders. The modular design allows the device to be converted to suit specific requirements. • Automatic system test: The integrated software of the intelligent e-Flow performs an automatic system test every time it is switched on, thus checking the functionality of the device before each use. • Intelligent 2-stage warning system:The electronics continuously monitor all important components and warn the user if the minimum volume flow is not reached, if the filter is full or if the battery power is too low. -> Acoustic, optical and mechanical (vibration alarm) signal • Reliable power source: Replaceable and lightweight lithium-ion battery with fast charging function and a long service life. Thanks to communication between the system and the battery, the remaining battery life is always shown in real time on the display. Technical details: • Lithium-ion battery: 14.4 V / 3.4 Ah • Battery  life approx. 7 to 10 hours • Air  flow 160 – 180 – 200 l/min Set consists of: e-Flow  blower unit with filter box, e-Flow battery, e-Flow charger and e-breathe comfort belt Standard is hood mode 160-180-200 l/min, can also be supplied as a variant for full masks and half masks with 120-140-160 l/min.*Hose must be ordered separately to fit the headpiece and is not included in the scope of delivery! Note:  The filters are not included in the scope of delivery and must be ordered separately. Product images with filters are for illustration purposes only. Respiratory protection systems (consisting of an air source, a hose and a headpiece) must be serviced  regularly in accordance with DGUV 112-190 and manufacturer's specifications to ensure proper and safe operation for users (see instructions for use). Please contact us if you have any questions; we are an authorised and certified service centre. 

e-breathe e-Flow Thanks to its innovative and modular design, this respiratory protection blower system is part of the latest generation. Blower / Technical details:• Lithium-ion battery: 14.4V / 3.4Ah• Replaceable battery• Battery life approx. 7 to 10 hours• Battery charging time 2.5 hours• Acoustic, visual and vibration alarm• Air flow 160 – 180 – 200 l/min• Adjustable volume flow on the device• DIN round thread hose connection• Colour display with all important information: real-time battery status, filter capacity, volume flow• Weight: approx. 1100 g• Approval: EN12941, EN12942, EN138 NEW! Multimask Pro 2nd generation with new face seals! The new second-generation face seals feature an improved fit and a click-in system for easier and faster assembly. Various face seals made from different materials are available, which can be individually tailored to the user's needs. Face seal:• New click-in system for easier installation• New improved fit• Easy to replace and washable• Materials: neoprene, silicone, foam, mesh • For use with a powered air-purifying respirator • Cellulose acetate visor with double-sided anti-fog coating • Wide field of vision & fog-free visor • Can be combined with a standard safety helmet • CE approved according to EN12941, TH3  highest protection class Ready-Pack consists of: Fan filter unit: e-Flow  e-breathe battery  e-breathe charging cradle e-breathe breathing air hose  e-breathe comfort belt  Service box  e-breathe headpiece 

e-breathe e-Flow Thanks to its innovative and modular design, this respiratory fan system is part of the latest generation. Fan / Technical details:• Lithium-ion battery: 14.4 V / 3.4 Ah• Replaceable battery• Battery life approx. 7 to 10 hours• Battery charging time 2.5 hours• Acoustic, visual and vibration alarm• Air flow rate 160 – 180 – 200 l/min• Adjustable volume flow on the device• DIN round thread hose connection• Colour display with all important information: battery status in real time, filter capacity, volume flow• Weight: approx. 1100 g• Approval: EN12941, EN12942, EN138 Headpiece Optimally coordinated: individual – comfortable – safe The new and innovative concept of the Multi-Hood impresses with its versatility and maximum wearing comfort. The lightweight positive pressure hoods from e-breathe offer users the highest protection class and can be optimally adapted to any area of application and different requirements. Thanks to the unique and innovative concept of the Multi Hood, the protective equipment can be adapted to your requirements and is available as both a dual-use and reusable hood. The hood is made of a low-noise, robust, crease- and lint-free material. The hood cover is available in different versions depending on the area of application and fits on different mounts. The individually selectable carrying systems allow the Multi Hood to be used with a head mount or helmet mount. Practical magnetic buttons allow the hood cover to be mounted on the respective mount in just a few simple steps. The helmet mount fits almost any standard industrial helmet. The Multi Hood sets new standards in terms of comfort:  the visor is ergonomically shaped and features an extra-large, distortion-free field of vision. A textile neck seal with elastic ensures that the Multi Hood fits perfectly around the neck. The shoulder cover can be worn inside or outside the protective suit. When worn inside, the suit is supplied with excess air. Product features: Certified respiratory protection according to EN 12941 Certified eye and face protection according to EN 166 F Head protection according to EN 397 Highest protection class TH3 Respiratory, head, face, neck and shoulder protection Suitable for beard and glasses wearers Distortion-free all-round vision Extremely low weight No G26 preventive medical examination • No wearing time limit Head mount The classic head mount is suitable for use without a helmet. Thanks to the adjustable head mount, the carrying system adapts to any head shape and offers an optimal fit and maximum wearing comfort. Ergonomic & user-friendly adjustment knobs: enable quick & easy adjustment for an optimal fit Adjustable headrest for an optimal fit & maximum comfort Quick & secure attachment of the hood to the carrying frame with extra-strong industrial magnetic buttons Breathable, replaceable & washable comfort headband