Ready-Pack e-breathe e-Flow PAD-Box / PM Lab Hood AV Limited Use

Under the motto "simple, solid & safe", e-breathe designs and develops the next generation of respiratory protection devices and systems. With resources becoming increasingly scarce, the sustainability of products is becoming more and more important. With the ecoPAD filter system, e-breathe is taking this environmentally friendly approach and going one step further: sustainable & efficient: The new ecoPAD system. ​The ecoPAD filter is a reusable filter designed with a screw-on filter housing. This means that the housing can be reused and the filter fleece can be replaced quickly and easily. The fleece used in the ecoPAD is exactly the same as the fleece used in encapsulated standard filters. The fleece is sealed in place by a special rubber coating developed specifically for the ecoPAD. The lower and upper parts of the filter housing can be connected in no time at all, securely enclosing the particle fleece. For the user, this means maximum protection with minimal breathing resistance. flat & lightweight  When developing the ecoPAD, they were explicitly designed to be particularly flat and lightweight. This means that only about a third of the space required for storing conventional filters is needed for storage. Environmentally friendly & budget-friendly  However, ecoPAD respiratory filters not only score points for saving space and costs in logistics and storage, but also protect the environment and material budget thanks to their reusable filter housing and modular design. Robust and comfortable  The filter housing impresses with its robust construction and therefore has a long service life. In terms of comfort, the filter scores points with its low breathing resistance and maximum protection in accordance with EN 143 and EN 12941/12942 as a particle filter in filter class P3 PSL R. Scope of delivery:  Replacement filter media for the reusable e-breathe P3 R SL particle filter housing. Packaging unit: 4 pieces Protection against solid and liquid particles, radioactive and highly toxic particles, microorganisms such as bacteria and viruses.

e-breathe P3 particle filter protects against solid and liquid particles, radioactive and highly toxic particles, microorganisms such as bacteria and viruses. For use with e-breathe respiratory protection fans as well as full-face masks and half masks with round thread connections Sustainable & efficient: the new ecoPAD system. ​The ecoPAD filter is a reusable filter designed with a screw-on filter housing. This means that the housing can be reused and the filter fleece can be replaced quickly and easily. The fleece used in the ecoPAD is exactly the same as the fleece used in encapsulated standard filters. The fleece is sealed in place by a special rubber coating that was developed specifically for the ecoPAD. The lower and upper parts of the filter housing can be connected in no time at all, securely enclosing the particle fleece. For the user, this means maximum protection with minimal breathing resistance. Scope of delivery:  Complete filter set: e-breathe particle filter P3 R /PSL with ecoPAD filter medium insert. (Reusable filter housing for e-breathe ecoPAD P3 R SL replacement filter media.)

Pre-filter with a diameter of 100 mm. Extra large volume, minimal filter resistance. Product details: - Can be used with all e-breathe filters, PM filters, Scott Filter Pro 2000 and Clean Air filters - Quantity: 20 pieces Scope of delivery:- 20 pre-filters  Pre-filter holders must be ordered separately. For Scott filters: 100052606 For e-breathe filters:  322052606  

The metal covers are attached to the  filter cover (black) and are used when working with flying sparks, for example during welding work.

Uncapsulated A2 filters with DIN round thread connection Note: If you require an A2P3 filter, you can connect the P3 PAD (particle filter) to the A2 filter. This then becomes an A2P3 combination filter. Protection against organic gases and vapours with a boiling point > 65°C. Suitable for:– Full face masks and half masks with DIN round thread connection– Respiratory protection fan: e-breathe e-Flow  Approval: EN 14387, EN 12941, EN 12942  Sustainable & efficient: The new ecoPAD filter system. The ecoPAD filter is a reusable filter designed with a screw-on filter housing. This means that the housing can be reused and the Ecopad GF can be replaced quickly and easily. The Ecopad GF (gas filter) is sealed using a special rubber coating developed specifically for the ecoPAD system. The lower and upper parts of the filter housing can be connected in no time at all and securely enclose the Ecopad GF. For the user, this means maximum protection with minimal breathing resistance. Scope of delivery:  Complete filter set: e-breathe gas filter A2 with ecoPAD filter medium insert. (Reusable filter housing for e-breathe ecoPAD A2 replacement gas filter media.)

Note: If you require an A2B2P3 filter, you can connect the P3 PAD (particle filter) to the A2B2E2K1 filter. This then becomes an A2B2E2K1 P3 combination filter. Protection against organic, inorganic and acidic gases and vapours, as well as ammonia. Suitable for:– Full face masks with DIN round thread connection– Respiratory protection fan: e-breathe e-Flow  Approval: EN 14387, EN 12941, EN 12942  Sustainable & efficient: The new ecoPAD filter system. The ecoPAD filter is a reusable filter designed with a screw-on filter housing. This means that the housing can be reused and the Ecopad GF can be replaced quickly and easily. The Ecopad GF (gas filter) is sealed using a special rubber coating that was developed specifically for the ecoPAD system. The lower and upper parts of the filter housing can be connected in no time at all, securely enclosing the Ecopad GF. For the user, this means maximum protection with minimal breathing resistance.

Uncapsulated A2 ecoPAD gas filtersNote: If you require an A2P3 filter, you can connect the P3 PAD (particle filter) to the A2 filter. This then becomes an A2P3 combination filter. Protection against organic gases and vapours with a boiling point > 65°C. Suitable for:– Full-face masks and half masks with DIN round thread connection– Respiratory protection fan: e-breathe e-Flow  Approval: EN 14387, EN 12941, EN 12942  Sustainable & efficient: The new ecoPAD filter system. The ecoPAD filter is a reusable filter designed with a screw-on filter housing. This means that the housing can be reused and the Ecopad GF can be replaced quickly and easily. The Ecopad GF (gas filter) is sealed using a special rubber coating that was developed specifically for the ecoPAD system. The lower and upper parts of the filter housing can be connected in no time at all, securely enclosing the Ecopad GF. For the user, this means maximum protection with minimal breathing resistance. Scope of delivery:  ecoPAD A2 gas filter

Uncapsulated ecoPAD GF A2B2E2K1 filters without filter housing.  Note: If you require an A2B2P3 filter, you can connect the P3 PAD (particle filter) to the A2B2E2K1 filter. This then becomes an A2B2E2K1 P3 combination filter. Protection against organic, inorganic and acidic gases and vapours, as well as ammonia. Suitable for:– Full face masks with DIN round thread connection– Respiratory protection fan: e-breathe e-Flow  Approval: EN 14387, EN 12941, EN 12942  Sustainable & efficient: The new ecoPAD filter system. The ecoPAD filter is a reusable filter designed with a screw-on filter housing. This means that the housing can be reused and the Ecopad GF can be replaced quickly and easily. The Ecopad GF (gas filter) is sealed using a special rubber coating that was developed specifically for the ecoPAD system. The lower and upper parts of the filter housing can be connected in no time at all, securely enclosing the Ecopad GF. For the user, this means maximum protection with minimal breathing resistance. Scope of delivery:  ecoPAD GFA2B2E2K1 filter