Ready-Pack e-breathe e-Flow PAD-Box / Multi-Hood Limited-Use (white) with Helmet Holder

€1,696.70*

incl. VAT.

Prices incl. VAT plus shipping costs

Available, delivery time: 1-2 Tage

Variante

Multi-Hood Limited-Use (gelb)

Multi-Hood Limited-Use (weiß)

Multi-Hood Mehrweg (blau)

Product number: 322005500

Manufacturer: e-breathe Safety

EAN: 04255801806030

e-breathe Prefilter (PU 20)

Pre-filter with a diameter of 100 mm. Extra large volume, minimal filter resistance. Product details: - Can be used with all e-breathe filters, PM filters, Scott Filter Pro 2000 and Clean Air filters - Quantity: 20 pieces Scope of delivery:- 20 pre-filters Pre-filter holders must be ordered separately. For Scott filters: 100052606 For e-breathe filters: 322052606

Product number: 302052691

Content: 20 Stück (€0.60* / 1 Stück)

€12.02*

e-breathe Particle Filter P3 R / PSL

e-breathe P3 particle filter protects against solid and liquid particles, radioactive and highly toxic particles, microorganisms such as bacteria and viruses. For use with e-breathe respiratory protection fans as well as full-face masks and half masks with round thread connections Sustainable & efficient: the new ecoPAD system. The ecoPAD filter is a reusable filter designed with a screw-on filter housing. This means that the housing can be reused and the filter fleece can be replaced quickly and easily. The fleece used in the ecoPAD is exactly the same as the fleece used in encapsulated standard filters. The fleece is sealed in place by a special rubber coating that was developed specifically for the ecoPAD. The lower and upper parts of the filter housing can be connected in no time at all, securely enclosing the particle fleece. For the user, this means maximum protection with minimal breathing resistance. Scope of delivery: Complete filter set: e-breathe particle filter P3 R /PSL with ecoPAD filter medium insert. (Reusable filter housing for e-breathe ecoPAD P3 R SL replacement filter media.)

Product number: 322002109

From €6.81*

Details

e-breathe Spark Arrester Inserts for ecoPAD (Pair)

The metal covers are attached to the filter cover (black) and are used when working with flying sparks, for example during welding work.

Product number: 322002138

€15.65*

Gas filter - e-breathe ecoPAD GF A2

Uncapsulated A2 ecoPAD gas filtersNote: If you require an A2P3 filter, you can connect the P3 PAD (particle filter) to the A2 filter. This then becomes an A2P3 combination filter. Protection against organic gases and vapours with a boiling point > 65°C. Suitable for:– Full-face masks and half masks with DIN round thread connection– Respiratory protection fan: e-breathe e-Flow Approval: EN 14387, EN 12941, EN 12942 Sustainable & efficient: The new ecoPAD filter system. The ecoPAD filter is a reusable filter designed with a screw-on filter housing. This means that the housing can be reused and the Ecopad GF can be replaced quickly and easily. The Ecopad GF (gas filter) is sealed using a special rubber coating that was developed specifically for the ecoPAD system. The lower and upper parts of the filter housing can be connected in no time at all, securely enclosing the Ecopad GF. For the user, this means maximum protection with minimal breathing resistance. Scope of delivery: ecoPAD A2 gas filter

Product number: 322002144

From €23.84*

Details

e-breathe ecoPAD P3 R/PSL (PU 4/45)

Under the motto "simple, solid & safe", e-breathe designs and develops the next generation of respiratory protection devices and systems. With resources becoming increasingly scarce, the sustainability of products is becoming more and more important. With the ecoPAD filter system, e-breathe is taking this environmentally friendly approach and going one step further: sustainable & efficient: The new ecoPAD system. The ecoPAD filter is a reusable filter designed with a screw-on filter housing. This means that the housing can be reused and the filter fleece can be replaced quickly and easily. The fleece used in the ecoPAD is exactly the same as the fleece used in encapsulated standard filters. The fleece is sealed in place by a special rubber coating developed specifically for the ecoPAD. The lower and upper parts of the filter housing can be connected in no time at all, securely enclosing the particle fleece. For the user, this means maximum protection with minimal breathing resistance. flat & lightweight When developing the ecoPAD, they were explicitly designed to be particularly flat and lightweight. This means that only about a third of the space required for storing conventional filters is needed for storage. Environmentally friendly & budget-friendly However, ecoPAD respiratory filters not only score points for saving space and costs in logistics and storage, but also protect the environment and material budget thanks to their reusable filter housing and modular design. Robust and comfortable The filter housing impresses with its robust construction and therefore has a long service life. In terms of comfort, the filter scores points with its low breathing resistance and maximum protection in accordance with EN 143 and EN 12941/12942 as a particle filter in filter class P3 PSL R. Scope of delivery: Replacement filter media for the reusable e-breathe P3 R SL particle filter housing. Packaging unit: 4 pieces Protection against solid and liquid particles, radioactive and highly toxic particles, microorganisms such as bacteria and viruses.

Product number: 322002110

Content: 4 Stück (€3.87* / 1 Stück)

From €15.48*

Details

Gas filter - e-breathe A2

Uncapsulated A2 filters with DIN round thread connection Note: If you require an A2P3 filter, you can connect the P3 PAD (particle filter) to the A2 filter. This then becomes an A2P3 combination filter. Protection against organic gases and vapours with a boiling point > 65°C. Suitable for:– Full face masks and half masks with DIN round thread connection– Respiratory protection fan: e-breathe e-Flow Approval: EN 14387, EN 12941, EN 12942 Sustainable & efficient: The new ecoPAD filter system. The ecoPAD filter is a reusable filter designed with a screw-on filter housing. This means that the housing can be reused and the Ecopad GF can be replaced quickly and easily. The Ecopad GF (gas filter) is sealed using a special rubber coating developed specifically for the ecoPAD system. The lower and upper parts of the filter housing can be connected in no time at all and securely enclose the Ecopad GF. For the user, this means maximum protection with minimal breathing resistance. Scope of delivery: Complete filter set: e-breathe gas filter A2 with ecoPAD filter medium insert. (Reusable filter housing for e-breathe ecoPAD A2 replacement gas filter media.)

Product number: 322002147

From €26.24*

Details

Gas filter - e-breathe ecoPAD GF ABEK

Uncapsulated ecoPAD GF A2B2E2K1 filters without filter housing. Note: If you require an A2B2P3 filter, you can connect the P3 PAD (particle filter) to the A2B2E2K1 filter. This then becomes an A2B2E2K1 P3 combination filter. Protection against organic, inorganic and acidic gases and vapours, as well as ammonia. Suitable for:– Full face masks with DIN round thread connection– Respiratory protection fan: e-breathe e-Flow Approval: EN 14387, EN 12941, EN 12942 Sustainable & efficient: The new ecoPAD filter system. The ecoPAD filter is a reusable filter designed with a screw-on filter housing. This means that the housing can be reused and the Ecopad GF can be replaced quickly and easily. The Ecopad GF (gas filter) is sealed using a special rubber coating that was developed specifically for the ecoPAD system. The lower and upper parts of the filter housing can be connected in no time at all, securely enclosing the Ecopad GF. For the user, this means maximum protection with minimal breathing resistance. Scope of delivery: ecoPAD GFA2B2E2K1 filter

Product number: 322002143

From €33.56*

Details

Gas filter - e-breathe ABEK

Note: If you require an A2B2P3 filter, you can connect the P3 PAD (particle filter) to the A2B2E2K1 filter. This then becomes an A2B2E2K1 P3 combination filter. Protection against organic, inorganic and acidic gases and vapours, as well as ammonia. Suitable for:– Full face masks with DIN round thread connection– Respiratory protection fan: e-breathe e-Flow Approval: EN 14387, EN 12941, EN 12942 Sustainable & efficient: The new ecoPAD filter system. The ecoPAD filter is a reusable filter designed with a screw-on filter housing. This means that the housing can be reused and the Ecopad GF can be replaced quickly and easily. The Ecopad GF (gas filter) is sealed using a special rubber coating that was developed specifically for the ecoPAD system. The lower and upper parts of the filter housing can be connected in no time at all, securely enclosing the Ecopad GF. For the user, this means maximum protection with minimal breathing resistance.

Product number: 322002146

From €34.40*

Details

e-breathe Decon Shower Cap (Piece)

The shower cap clicks onto the filter cover and prevents water from entering the filter during showering/decontamination.

Product number: 322002224

€13.45*

e-breathe e-Flow Charging Station

Charging cradle for lithium-ion batteries for the e-breathe e-flow respiratory ventilator. The charging cradle charges the following batteries: -e-breathe e-Flow battery

Product number: 322005003

€252.28*

e-breathe e-Flow PAD-Box V1.2 (Box for ecoPAD Filter-System)

Spare parts & accessories e-Flow e-Flow Pad Box Used to switch an e-breathe e-flow fan from the filter box system to the PAD box system. Only possible via our customer service. Please contact us, quoting item number 322005001!

Product number: 322005001

€45.70*

e-breathe Filterdeckel

Ersatz Filter Deckel für e-Flow Pad-Box Aufnahme und e-breathe Filter.

Product number: 322002131

€5.77*

e-breathe Gas Filter - Adapter (Piece)

Replacement gas filter adapter for e-breathe e-Flow PAD system and e-breathe filter system.

Product number: 322002246

€12.02*

e-breathe Prefilter (PU 20)

Product number: 302052691

Content: 20 Stück (€0.60* / 1 Stück)

€12.02*

e-breathe Prefilter Holder

The pre-filter holder clicks onto the filter cover and is required to use the pre-filter and radio protection. The openings on the sides of the pre-filter holder prevent direct suction.

Product number: 322052606

Content: 2 Stück (€5.42* / 1 Stück)

€10.83*

e-breathe Spark Arrester Inserts for ecoPAD (Pair)

The metal covers are attached to the filter cover (black) and are used when working with flying sparks, for example during welding work.

Product number: 322002138

€15.65*

e-breathe Wall Mount for Charging Station

The e-breathe wall mount allows the e-breathe charging cradle to be mounted on the wall.

Product number: 322002136

€16.24*

e-Flow Battery V. 3.0 Li-Ion 14,4 V / 3,4 Ah / 49WH

Lithium-ion battery for the e-breathe e-Flow respiratory fan. Charging cradle: -e-breathe e-Flow charging cradle

Product number: 322002236

€403.29*

e-breathe Decon Shower Cap (Piece)

The shower cap clicks onto the filter cover and prevents water from entering the filter during showering/decontamination.

Product number: 322002224

€13.45*

e-breathe e-flow Cleaning- / Storage-Kit - Filter-Box (Deconset)

Variante: für e-Flow mit Filter-Box

Spare parts & accessories e-Flow e-breathe e-flow Cleaning/storage kit for e-breathe e-Flow with filter box

Product number: 500510048

€30.88*

e-breathe e-Flow Disposable Device Cover - Filter Box (Limited Use)

Version: Filter-System

Accessories: Protective cover with viewing window for e-Flow blower unit filter system. Protects the blower unit from contamination. The display window allows you to continue to read the volume flow indicator, battery indicator and filter indicator. Quantity: 1 piece Material: Limited use

Product number: 322005005

€11.19*

e-breathe e-Flow Heat Protection Cover - PAD-Box

Variante: für e-Flow mit Pad-Box

Spare parts & accessories e-Flow e-Flow heat protection device cover (aluminised protective cover for respiratory protection fan) - PAD box for e-breathe e-Flow with Pad Box - Filter box for e-breathe e-Flow with Filter Box

Product number: 223100402

€209.98*

e-breathe Service-Box *M*

Variante: Größe M (40cmx30cmx22cm)

Our practical e-breathe service boxes are available in two sizes and are ideal for storing and shipping your equipment. e-breathe Service Box M - 40 cm long x 30 cm wide x 22 cm high

Product number: 119458610

€61.64*

PM Aufbewahrungskoffer Schwarz

Kunststoffkoffer 420x305x155 mm zur Aufbewahrung für Atemschutzgebläse oder Masken.

Product number: 119458616

€45.10*

PM PSA RescueClean F1 Desinfektionsmittel

Die Rescueclean F1 Schnelldesinfektion ist alkoholfrei und damit auch für empfindliche Materialien geeignet.Es ist schnell wirksam und schont dabei sensible Oberflächen wie z.B. Acrylglas oder Polycarbonatglas. RescueClean F1 hat neben seiner guten Desinfektionsleistung auch eine gute Reinigungsleistung für leichte Verschmutzungen.RescueClean F1 ist gebrauchsfertig, benetzt gleichmäßig, bildet keine sichtbaren Rückstände und ist angenehm im Geruch. Die gute Materialverträglichkeit gestattet eine universelle Anwendung. Mit breiter mikrobiologischer Wirksamkeit in praxisgerechten Einwirkzeiten. Durch die gute Materialverträglichkeit ist RescueClean F1 sehr gut im Bereich der persönlichen Schutzausrüstung von Feuerwehren und Rettungswesen einsetzbar, um in der Atemschutzwerkstatt oder an der Einsatzstelle Keime wirksam abzutöten.Auch hervorragend geeignet zum Tränken von Vliesrollen.alkoholfrei und aldehydfrei, daher sehr gute Materialverträglichkeitbakterizid, tuberkulozid und mycobakterizid, inkl. MRSAwirksam gegen behüllte Viren wie z. B. HCV/HBV/HIV, Corona und Influenzaschnelle Desinfektion im Bereich Atemschutz, Werkstatt und an der EinsatzstelleGewinde der Rundflasche: 28Wirksame Bestandteile in 100g: 0,35g Alkyldimethylbenzylammoniumchlorid0,25g Aminopropyldodecylpropandiamin0,1g 2-Phenoxyethanolweitere Bestandteile: Hilfsstoffe, deionisiertes WasserHinweis: Dieses Gemisch ist nicht als gefährlich eingestuft im Sinne der Verordnung (EG) Nr. 1272/2008.Keine besonders zu erwähnenden Gefahren. Das Produkt enthält keine gefährlichen Stoffe, die aufgrund der VO Nr. 2015/830 Anhang II, Teil A, 3.2.2. in Kapitel 3 genannt werden müssen. Das Produkt enthält keine gelisteten SVHC Stoffe >0,1% gemäß VO (EG) Nr. 1907/2006 §59 (REACH). Bei Unfall oder Unwohlsein sofort Arzt hinzuziehen. Von Kindern fernhalten.BauA: N-81358Biozide sicher verwenden. Vor Gebrauch stets Kennzeichnung und Produktinformationen lesen.

Product number: 129001000

€14.16*

PM RescueClean P3 (ehem. Curacid PSA Ultra) 1-Liter

Das RescueClean P3 PSA Desinfektionsmittel ist für die manuelle Aufbereitung von persönlicher Schutzausrüstung geeignet. RescueClean P3 kann auch im Ultraschallbad sehr gut eingesetzt werden. Die sehr guten materialschonenden Eigenschaften gegenüber EPDM und Silikon, wurde durch die DEKRA EXAM bestätigt. RescueClean P3 wird in kaltem Wasser angewendet und löst durch das spezielle System aus Tensiden und Komplexbildnern hervorragend auch organische Verschmutzungen wie Blut, Eiweiß, Sekrete und Fett. Die Dosierungsempfehlung liegt bei lediglich 1%. Nach dem Desinfektionsvorgang Spülgut mit klarem Wasser abspülen. RescueClean P3 ist identisch mit Curacid PSA Ultra.extrem materialschonendzur manuellen Desinfektion im Tauchbad und für Ultraschallbeckenkeine Raumluftbelastungideal für organische Verschmutzungensehr wirtschaflichGewindegröße des Kanisters: 51Wirksame Bestandteile in 100g: 7,0g 3-Aminopropyldodecylpropane-1,3-diamin; weitere Bestandteile: Isotridecanol, ethoxyliert (>=2,5 EO), Milchsäure, Alkohole, C12-14, ethosyliert, Sulfate, NatriumsalzeGefahren- und Sicherheitshinweise: Gefahr! Kann gegenüber Metallen korrosiv sein. Verursacht schwere Verätzungen der Haut und schwere Augenschäden. Sehr giftig für Wasserorganismen mit langfristiger Wirkung. Ist ärztlicher Rat erforderlich, Verpackung oder Kennzeichnungsetikett bereithalten. Darf nicht in die Hände von Kindern gelangen. Nur in Originalverpackung aufbewahren. Staub/Rauch/Gas/Nebel/Dampf/Aerosol nicht einatmen. Schutzhandschuhe/Schutzkleidung/Augenschutz/Gesichtsschutz/Gehörschutz tragen. Bei Verschlucken: Mund ausspülen. Kein Erbrechen herbeiführen. Bei Kontakt mit den Augen: Einige Minuten lang behutsam mit Wasser ausspülen. Eventuell vorhandene Kontaktlinsen nach Möglichkeit entfernen. Weiter ausspülen. Sofort Giftinformationszentrum/Arzt anrufen. Inhalt/Behälter der Entsorgung gemäß den örtlichen/nationalen/internationalen Vorschriften zuführen.BauA-Nr.: N-105395Biozide sicher verwenden. Vor Gebrauch stets Kennzeichnung und Produktinformationen lesen.

Product number: 129001003

€33.58*

e-breathe Back Support Plate Pro V2.0

e-breathe Back Support Plate Pro V2.0 • High wearing comfort for long-term use • Back padding for low contact surface and air circulation• Optimal weight distribution• Quick and secure attachment of the blower unit For use with: • e-breath e-Flow, PM Proflow Note: Blower not included.

Product number: 322001057

€140.18*

Tip

e-breathe Belt Decon

Decontaminable strap compatible with the following respiratory protection blowers: e-breathe e-flow, e-breathe Smartblower, Proflow 2 SC/EX/3, Autoflow and Duraflow Width: 40 mm Colour: Black

Product number: 302062996

€45.34*

e-breathe belt Pro (textile, 40 mm)

Variante: mit Plastikschnalle

Woven strap compatible with the following respiratory protection blowers: e-breathe e-flow, Proflow 2 SC/EX/3, Autoflow and Duraflow Width: 40 mm Material: Nylon Colour: Black

Product number: 108062786

€44.98*

e-breathe Belt Pro (textile, 40 mm) - with Metal Buckle T9

Variante: mit Metallschnalle

Woven strap compatible with the following respiratory protection blowers: e-breathe e-flow, Proflow 2 SC/EX/3, Autoflow and Duraflow Width: 40 mm Material: Nylon Colour: Black

Product number: 108062787

Variants from €44.98*

€64.22*

e-breathe Comfort Belt Pro V.2.1 (textile)

Accessory for the e-breathe e-Flow, PM Proflow 2 SC & Duraflow as a comfort belt with back padding for greater wearing comfort, even during longer periods of use. The back padding reduces the contact area and allows heat to dissipate more effectively. The belt is washable. Compatible with: Smartbelt back belt system, e-breathe e-Flow, PM Proflow2 SC & Duraflow Thanks to its modular design, you can expand the belt into a shoulder carrying system at any time with the e-breathe shoulder harness (Shoulder Harness Pro 3.0).

Product number: 322003003

€89.13*

Tip

e-breathe Shoulder Harness Pro 3.0

Textile shoulder strap for use with the e-breathe comfort belt. The e-breathe shoulder strap (Shoulder Harness Pro 3.0) is the perfect complement to the e-breathe comfort belt. The Velcro fastening technology on the adjustable straps allows the harness to be quickly and easily attached to the e-breathe comfort belt , transforming it into an ergonomic shoulder carrying unit ( ) for your breathing apparatus blower for effective back relief. This distributes the load of the breathing apparatus optimally across the body, thereby supporting ergonomic working. The shoulder harness has a loop on the back for securing the breathing air hose in place, as well as shoulder reflectors. The loop on the back has been specially designed to securely position the breathing air hose of your respiratory protection blower. This cleverly designed loop ensures that the hose is kept close to the body so that it does not get in the way, become tangled or cause any discomfort during use. The reflectors offer increased visibility for the wearer in poorly lit or dark working environments.Shoulder reflectors for better visibility of the userLoop for hose feed-through Ergonomic shoulder strap to complement your carrying system Scope of delivery: Shoulder strap only, without comfort belt

Product number: 322003015

€47.01*

e-breathe Shoulder Strap (decontaminable)

Decontaminable shoulder strap. For use with e-breathe e-Flow, Duraflow, Proflow 2 SC and Proflow Ex Features: • Easy and quick cleaning • Free choice of blower position thanks to adjustable back straps • High wearing comfort for long-term use Colour: Black

Product number: 302001012

€122.64*

Smartbelt Belt Extension

The belt extension serves to extend the belt circumference for the Smartbelt belt system.

Product number: 322003010

€19.99*

Product information "Ready-Pack e-breathe e-Flow PAD-Box / Multi-Hood Limited-Use (white) with Helmet Holder"

e-breathe e-Flow

Thanks to its innovative and modular design, this respiratory fan system is part of the latest generation.

Fan / Technical details:
• Lithium-ion battery: 14.4 V / 3.4
Ah• Replaceable battery•
Battery life approx. 7 to 10 hours•
Battery charging time 2.5 hours•
Acoustic, visual and vibration alarm•
Air flow rate 160 – 180 –
200 l/min• Adjustable volume flow on the
device• DIN round thread hose
connection• Colour display with all important information: battery status in real time, filter capacity, volume
flow• Weight: approx.
1100 g• Approval: EN12941, EN12942, EN138

Optimally coordinated: individual – comfortable – safe The new and innovative concept of the Multi-Hood impresses with its versatility and maximum wearing comfort. The lightweight positive pressure hoods from e-breathe offer users the highest protection class and can be optimally adapted to any area of application and different requirements.

Thanks to the unique and innovative concept of the Multi Hood, the protective equipment can be adapted to your requirements as desired and is available as both a dual-use and reusable hood. The hood is made of a low-noise, robust, crease- and lint-free material.

The hood cover is available in different versions depending on the area of application and fits on different mounts. The individually selectable carrying systems allow the Multi Hood to be used with a head mount or helmet mount. Practical magnetic buttons allow the hood cover to be mounted on the respective mount in just a few simple steps. The helmet mount fits almost any standard industrial helmet.

The Multi Hood sets new standards in terms of comfort: the visor is ergonomically shaped and features an extra-large, distortion-free field of vision. A textile neck seal with elastic ensures that the Multi Hood fits perfectly around the neck. The shoulder cover can be worn inside or outside the protective suit. When worn inside, the suit is supplied with excess air.

Product features:

Certified respiratory protection according to EN 12941
Certified eye and face protection according to EN 166 F
Head protection according to EN 397
Highest protection class TH3
Respiratory, head, face, neck and shoulder protection
Suitable for beard and glasses wearers
Distortion-free all-round vision
Extremely low weight
No G26 preventive medical check-up • No wearing time limit

Helmet mount

The innovative and lightweight helmet mount fits almost any standard industrial helmet and is quick and easy to install.

Quick and secure attachment of the hood to the carrying frame with extra-strong industrial magnetic buttons
Compatible with most standard safety helmets
Intelligent and secure attachment of helmet and carrying frame

Note: Product is delivered without helmet.

Properties "Ready-Pack e-breathe e-Flow PAD-Box / Multi-Hood Limited-Use (white) with Helmet Holder"

Article Type:	Ready-Pack Gebläse-Atemschutz
Filteranschluss:	e-breathe Pad-Anschluss
Größe:	Universal
Hersteller:	e-breathe Safety
Lieferzeit:	2-5 Tage
Luftleistung:	160 - 180 - 200 l/min
Normen/Kategorien:	DIN EN 12941
Schutzklasse:	TH3

Hinweis zu Produktangaben und technischen Daten

Alle auf dieser Website bereitgestellten Produktbeschreibungen, technischen Daten, Abbildungen und sonstigen Angaben wurden mit größtmöglicher Sorgfalt erstellt und beruhen auf den Informationen der jeweiligen Hersteller oder Lieferanten. Dennoch übernehmen wir keine Gewähr für die Richtigkeit, Vollständigkeit und Aktualität dieser Angaben. Maßgeblich für die Nutzung und den Einsatz der Produkte sind stets die offiziellen Informationen und technischen Dokumentationen des jeweiligen Herstellers. Wir empfehlen, diese vor dem Einsatz eigenverantwortlich zu prüfen. Eine Haftung für Schäden oder Folgeschäden, die aus fehlerhaften oder unvollständigen Angaben auf dieser Website entstehen, ist – soweit gesetzlich zulässig – ausgeschlossen.